Identification of Defects in Electronic Component Products: Case Study at PT Omron Manufacturing of Indonesia
DOI:
https://doi.org/10.62535/cx000d94Keywords:
Pareto chart, Fishbone diagram, FMEA, Identification of Defect ProductAbstract
The identification of product defects at PT Omron Manufacturing of Indonesia is motivated by the large number of defect discoveries in the January-October 2023 period, these defects cause considerable losses, namely the number of product parts disposed of in the amount of 3591. Based on these problems, the purpose of this research is to identify the causes of defects and formulate alternative solutions for continuous improvement. Identification of defects using the Pareto diagram method, fishbone analysis, and failure mode and effect analysis (FMEA), after getting the cause with the highest risk of priority number (RPN) value, the next step is to find alternative solutions using the 5W + 1H kaizen approach. The output generated from this research is daily checklist maintenance for operators and weekly checklist maintenance for the productive maintenance department.
References
Adeosandi F, Askafi E, Mutiara N. 2023. The Effect of Product Quality and Distribution Channels on Repurchasing Intention. J Manaj Ind dan Logistik. 7(1):177–194. doi:10.30988/jmil.v7i1.988.
Afnina A, Hastuti Y. 2018. Pengaruh Kualitas Produk terhadap Kepuasan Pelanggan. J Samudra Ekon dan Bisnis. 9(1):21–30. doi:10.33059/jseb.v9i1.458.
Apriliani F, Zulkhulaifah JA, Aisara DL, Habibie FR, Iqbal M, Sonjaya SA. 2022. Pemanfaatan Checksheet Audit 5R dalam Menunjang Productive Maintenance pada Usaha Bengkel Sepeda Motor. Madaniya. 3(4):1038–1048. https://madaniya.pustaka.my.id/journals/contents/article/view/326.
Aristriyana E, Fauzi RA. 2023. Analisis Penyebab Kecacatan Produk Dengan Metode Fishbone Diagram Dan Failure Mode Effect Analysis (Fmea) Pada Perusahaan Elang Mas Sindang Kasih Ciamis. J Ind Galuh. 4(2):75–85. doi:10.25157/jig.v4i2.3021.
Danastiningrum A, Akbar MI. 2019. USULAN PERBAIKAN TINGKAT KEPUASAN KERJA KARYAWAN DIVISI HCGS & SHE DENGAN METODE 5W1H DI PT. KALIMANTAN PRIMA PERSADA. 01(1):25–31.
Dwiyanti P, Lasalewo T, Hasanuddin. 2023. RE-DESIGN LINE HEADER DISCHARGE PADA SISTEM PERPIPAAN NITROGEN GENERATOR DI PT . PERTAMINA EP CEPU REGIONAL 4 ZONA 13 DONGGI- MATINDOK FIELD DENGAN MENGGUNAKAN METODE FISHBONE DIAGRAM. 3(1):7–16.
Faizah ZN, Rofi’ah S. 2022. Pengembangan Video Interaktif Tari KREASI dAERAH bERBASIS 5W1H Pada Pembelajaran Tematik Kelas IV Madrasah Ibtidaiyah.
Gata W, Oryza Gilang H. 2017. Analysis of information system quality of service on BSI Academy’s environment using webqual methods, importance performance analysis and fishbone. J Theor Appl Inf Technol. 95(2):229–241.
Hamid A, Baba I, Sani W. 2017. Risk Management Framework in Oil Field Development Project by Enclosing Fishbone Analysis. 7(2):446–452.
Helia VN, Wijaya WN. 2017. Failure Mode and Effect Analysis (FMEA) Applications to Identify Iron Sand Reject and Losses in Cement Industry : A Case Study. IOP Conf Ser Mater Sci Eng. 215(1). doi:10.1088/1757-899X/215/1/012039.
Immawan T, Sutrisno W, Rachman AK. 2018. Operational risk analysis with Fuzzy FMEA ( Failure Mode and Effect Analysis ) approach ( Case study : Optimus Creative Bandung ). 01084.
Kurnia H, Riandani AP, Aprianto T. 2023. Application of the Total Productive Maintenance to Increase the Overall Value of Equipment Effectiveness on Ventilator Machines. J Optimasi Sist Ind. 22(1):52–60. doi:10.25077/josi.v22.n1.p52-60.2023.
Laetitia P. 2022. Perancangan Ulang dan Proses Permesinan Pressing Machine pada Pembuatan Temperature Controller.
Luayyi S, Ardiyanti A, Kusumaningarti M. 2023. Penerapan Biaya Kualitas dengan Metode Zero Defect Guna Meningkatkan Laba Perusahaan (Studi Kasus Pada PT Putra Jaya Nanas). 8(1):8–14.
Misrah M. 2014. Peningkatan Kemampuan Siswa Membuat Kalimat Tanya melalui Teknik 5w 1h di Kelas IV SD Inpres Lobu Gio Jurnal Kreatif Tadulako Online Vol . 1 No . 4 ISSN 2354-614X. J Kreat Tadulako. 1(4):55–66.
Nurdin A, Maulidevi NU. 5W1H Information Extraction with CNN- Bidirectional LSTM.
Oktavenia KAR, Ardani IGAKS. 2019. Pengaruh Kualitas Produk Terhadap Keputusan Pembelian Handphone Nokia Dengan Citra Merek Sebagai Pemediasi. 8(3):1374–1400.
Oktavia A, Herwanto D. 2021. Analisis Pengendalian Kualitas Produk Menggunakan Pendekatan Statistical Quality Control (SQC) di PT. Samcon. Ind Inov J Tek Ind. 11(2):106–113. doi:10.36040/industri.v11i2.3666.
Purwanggono B, Margarette A. 2017. Risk assessment of underpass infrastructure project based on IS0 31000 and ISO 21500 using fishbone diagram and RFMEA (project risk failure mode and effects analysis) method. IOP Conf Ser Mater Sci Eng. 277(1):0–8. doi:10.1088/1757-899X/277/1/012039.
Rohani QA, Suhartini. 2021. Analisis Kecelakaan Kerja dengan Menggunakan Metode Risk Priority Number , Diagram Pareto , Fishbone , dan Five Why ’ s Analysis.
Sabri M, Putra MR. 2018. Analisa Kegagalan pada Sistem Rem Daihatsu Taft Hiline dengan Menggunakan Metode FMEA (Failure Mode and Effect Analysis). Talent Conf Ser Energy Eng. 1(2):181–190. doi:10.32734/ee.v1i2.248.
Sari CFK, Supardi. 2022. Pareto Diagrams Study of Gross Regional Domestic Product Exposure in Certain Sectors in a Region. cJURUTERA - J Umum Tek Terap. 9(02):23–27. doi:10.55377/jurutera.v9i02.6643.
Saputra B. 2018. Evaluasi Keandalan Sistem Cooling Water System (CWS) dan Fuel Oil Supply (FOS) Menggunakan Metode Failure Mode aND aNALYSIS (FMEA).
Siregar I, Nasution AA. 2018. Component identification the causes of machinery damage in pharmacy company using Pareto diagram. IOP Conf Ser Mater Sci Eng. 420(1). doi:10.1088/1757-899X/420/1/012139.
Siregar K, Siregar SF. 2018. Analysis of Causes of Defects Gloves and Bar Soap Using Failure Mode and Effect Analysis (FMEA) in XYZ Company. IOP Conf Ser Mater Sci Eng. 288(1). doi:10.1088/1757-899X/288/1/012089.
Subriadi AP, Najwa NF. 2020. The consistency analysis of failure mode and effect analysis (FMEA) in information technology risk assessment. Heliyon. 6(1):e03161. doi:10.1016/j.heliyon.2020.e03161.
Tajuddin T, Junaedi A. 2021. Usulan Pengendalian Kualitas Pelayanan Pada Pt. Pegunungan Cartenz Papua Menggunakan Metode Statistical Processing Control. Metod J Tek Ind. 7(1):1–17. doi:10.33506/mt.v7i1.1646
.
Takahashi M, Kosaka R, Nanba R, Anang Y, Watanabe Y. 2017. A study of methodology for securing control software based FMEA-FTA coordination. SII 2016 - 2016 IEEE/SICE Int Symp Syst Integr., siap terbit.
Wicaksono PA, Rozaq R. 2020. Applying Kaizen in Quality for Reducing Dent Defect per Unit. IOP Conf Ser Mater Sci Eng. 722(1). doi:10.1088/1757-899X/722/1/012041.
Widnyana IP, Ardiana IW, Wolok E, Lasalewo T. 2022. Penerapan Diagram Fishbone dan Metode Kaizen untuk Menganalisa Gangguan pada Pelanggan PT PLN (Persero) UP3 Gorontalo. Jambura Ind Rev. 2(1):1–9. doi:10.37905/jirev.2.1.11-19.
